Turn the drawings you own into data you can query.
Symbol detection against your library, a connectivity graph resolved into process, signal and electrical networks, the full DEXPI field set from the title block — and the drawing re-drawn from the model and scored against the original.
Make the P&ID queryable engineering data instead of geometry — so it can feed digital twin, HAZOP, asset register and design reuse.
Geometry on the left. A model on the right.
Drag the divider. The left is what a scanned P&ID is to a computer — lines. The right is what the convertor makes of it — typed components and the networks between them. Hover a component to trace its network.
- Every component typed and tagged
- Networks traced end to end
- Illustrative drawing — not a client sheet
Valves, instruments, fittings and sheet connectors classified against a client library rather than guessed.
Component to component, resolved into process, signal, liquid and electrical networks and instrument loops.
The full DEXPI field set, extracted from the drawing frame.
The drawing is re-drawn from the extracted model and scored against the original, so fidelity is measured, not claimed.
Topology, drawing, overlay and compare views, plus a schema and rule validator for the engineer to accept.
A never-before-seen drawing runs end to end with no per-drawing setup.
On one reference drawing.
Resolved into 57 networks.
On bound endpoints, against a hand-checked truth set.
720 instances classified on one sheet.