P&ID guides / 6 guides
P&ID guides for the engineers who use the drawings.
Practical guides for the engineers who work with P&IDs: what it takes to turn legacy drawings into data, what the DEXPI standard is, how registers, revision review, isolation planning and HAZOP preparation are read off the drawing — and where software helps and where it must not decide.
Digitisation · 9 minP&ID digitisation: turning legacy drawings into dataStarting points, what gets extracted, how accuracy is measured, how to scope an archive — and build or buy.Read the guide DEXPI · 6 minWhat is DEXPI? The P&ID data standard explainedWho maintains it, Proteus XML versus DEXPI 2.0, which tools read and write it, and how to check a file you receive.Read the guide Registers · 5 minLine list and instrument index from P&IDs (free Excel template)What each register holds, how to read it off the drawing, the errors that creep in — and a free Excel template.Read the guide Revision review · 5 minP&ID revision comparison: what changed between Rev B and Rev CClouds and PDF overlays versus a model diff, what a component-level comparison catches, and closing review comments on evidence.Read the guide Isolation · 6 minIsolation planning from P&IDs: finding the isolation pointsPositive, proved and non-proved isolation, which valves count, vents and drains, root valves and off-sheet limits — and what software must not decide.Read the guide HAZOP · 6 minHAZOP preparation: defining nodes and pre-filling the worksheetChoosing nodes, writing the design intent, guide words per IEC 61882, reading safeguards off the drawing — and what to leave to the team.Read the guide
→/ The toolsP&ID Studio
Each guide has a tool behind it.
The guides stand on their own. Where a step can be read off the drawing by software, the tool that does it is linked at the end — with what it does not do. P&ID Studio